More Frequency Reference

So,

Following my musings last time over the QRP Labs GPS module, I've now also built two further kits from QRP Labs. The S5351A Module and the VFO.

When you combine all these together in the way I have you can create a GPS disciplined frequency reference with two outputs.

One of the outputs can be fixed in the firmware and I plan to put mine on 10MHz, I've made a low pass filter for this output to clean out the harmonics. The other output can be user set to any frequency up to about 290MHz or so.



Here's the LPF for the 10MHz output:


And here's the 10MHz output before the LPF:



and after:




All good, egh?